Description
Outfall Check Valves TF-1 Check Valve
Tideflex TF-1 Slip-On Check Valves
100% elastomer construction eliminates maintenance
Will not warp or freeze open or shut
Eliminates backflow, seals 100%
Custom built to customer specifications
Curved Bill enhances sealing
Available in diameters from 1/2″ to 120″
Materials of Construction
Available Elastomers
The TF-1 is Tideflex Technologies’s most commonly used check valve configuration. Designed primarily for end-of-pipe outfall installations, the TF-1 features a flat bottom and flared top. This allows the valve to be installed at a lower overall elevation than other configurations, with less bottom clearance required. this is especially important in low-lying areas where maintaining as much driving head is critical, or where silt , sand and debris might be present beneath the valve
This design is also ideal for existing manhole installations where the invert of the pipe is close to the floor of the vault. There are many check valves in interceptors, manholes, and vaults. These vaults are designed so that there would be a maximum gravity head; thus, the invert pipe is as close to the base as possible. The TF-1 allows installations in such applications
